Request a Free Consultation
March 5, 2019
Shoulder press Male
May 6, 2019
Show all
Cut a 4″ PVC pipe to a 12″ length and use pipe glue to adhere cap. (The cap isn’t necessary but it makes the clubs more resilient, easier to pour, and easier to set down.)
The handle is made from half of a pre-lathed decking post and 2″ screws to anchor it in the concrete.
Checking the spacing will help to center the handle. Another option would be to cut a small dowel the diameter of the PVC drill the appropriate hole through the handle and center the dowel.
I used 2″ screws to center the handle. This also provides a way for the handle to be supported in the concrete.
This is the unfilled PVC next to the finished product.

Leave a Reply

%d bloggers like this: